Disposal; Translation Of The Original Conformity Declaration; Warranty - ULTIMATE SPEED 303565 Operation And Safety Notes

= Close the release valve
the section on "Raising the vehicle").
= There is not enough hydraulic oil in the
vehicle jack.
= Top up the hydraulic oil (see the section on
"Topping up the hydraulic oil / greasing").
= There is too much hydraulic oil in the cylinder.
= Remove the excess quantity of hydraulic oil
from the cylinder.
= There is air in the hydraulic system.
= Remove the air in the hydraulic system (see
the section on "Removing air from the hydrau-
lic system").
= The vehicle jack gives way under load.
= The release valve
5
= Close the release valve
the section on "Raising the vehicle").
= Hydraulic oil escapes.
= There is too much hydraulic oil in the cylinder.
= Remove the excess quantity of hydraulic oil
from the cylinder.
= The pump mechanism works only partially.
= There is too much hydraulic oil in the cylinder.
= Remove the excess quantity of hydraulic oil
from the cylinder.
= There is air in the hydraulic system.
= Remove the air in the hydraulic system
(see the section on "Removing air from the
hydraulic system").

Disposal

Q
The packaging is made entirely of recyclable
materials, which you may dispose of at local re-
cycling facilities.
To help protect the environment, please dispose
of the product properly when it has reached the
end of its useful life and not in the household
waste. Information on collection points and their
opening hours can be obtained from your local
authority.
completely (see
5
was not properly closed.
completely (see
5
Dispose of the hydraulic oil in an environmentally
compatible manner. Ask your local repair garage
to see to its disposal or find your nearest waste
materials collection centre.
Translation of the original
Conformity Declaration
We, OWIM GmbH & Co. KG Stiftsbergstraße 1,
DE-74167 Neckarsulm, GERMANY, hereby
declare under our sole responsibility that the
product: Hydraulic Bottle Jack, Model No.:
HG02971, Version: 06 / 2018, to which this
declaration refers, complies with the directive of
2006/42/EC.
Related harmonised standard:
EN 1494/A1: 2008
Serial number: IAN 303565
Tobias Koenig
Division Manager
Neckarsulm, 13.04.2018
The complete declaration of conformity can be
viewed at: www.owim.com

Warranty

The product has been manufactured to strict
quality guidelines and meticulously examined
before delivery. In the event of product defects
you have legal rights against the retailer of this
product. Your legal rights are not limited in any
way by our warranty detailed below.
The warranty for this product is 3 years from the
date of purchase. Should this product show any
fault in materials or manufacture within 3 years
GB/IE 17