Download
Share
Print this page
  1. Manuals
  2. Brands
  3. STEIN Manuals
  4. Bathroom Fixtures
  5. WINDSOR SHOWER UNIT SQUARE & ALCOVE
  6. Assembling instructions

STEIN WINDSOR SHOWER UNIT SQUARE & ALCOVE Assembling Instructions

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
WINDSOR SHOWER UNIT
SQUARE (2 SIDED) AND ALCOVE
JAN 2020
IMPORTANT!
1.
When you receive your Windsor Square Shower package please check for any freight damage.
2. If damage has occurred advise your supplier within 8 hours.
3. Do not install any faulty product as this will invalidate later claims.

Advertisement

loading
Need help?

Need help?

Do you have a question about the WINDSOR SHOWER UNIT SQUARE & ALCOVE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for STEIN WINDSOR SHOWER UNIT SQUARE & ALCOVE

Summary of Contents for STEIN WINDSOR SHOWER UNIT SQUARE & ALCOVE

  • Page 1 WINDSOR SHOWER UNIT SQUARE (2 SIDED) AND ALCOVE JAN 2020 IMPORTANT! When you receive your Windsor Square Shower package please check for any freight damage. 2. If damage has occurred advise your supplier within 8 hours. 3. Do not install any faulty product as this will invalidate later claims.

  • Page 2: Warranty

    WINDSOR SHOWER UNIT SQUARE & ALCOVE WARRANTY • This covers faulty product. Check www.stein.co.nz for full details of warranty. • Any breakage on site will not be covered. • The installation must conform to the instructions for the warranty to apply.

  • Page 3: Assembly Diagram

    ASSEMBLY DIAGRAM Before commencing installation, please ensure you have the following components in your package to complete installation. REF TICK DESCRIPTION PART NO. Door assembly wall channel PAR5063 Return panel wall channel PAR5209 Fixed return panel Door front assembly Handle set PAR5001 Fixed panel screws 4x10mm Fixed panel screw caps...
  • Page 4 LAYOUT PLAN A WALL WALL CHANNEL CHANNEL 22mm IMPORTANT: 1. Position the wall profiles at 22mm off the acrylic tray edge. 2. Recalculate the specific position if tray is not level, walls are out of plumb protruding or curving inwards more than 5mm. INSTALLATION STEPS: PAGE 5 TO 9 MINIMUM AND MAXIMUM TABLE Wall out of plumb will not allow the full minimum / maximum range.
  • Page 5 LAYOUT PLAN B - WINSDOR ALCOVE (DOOR ONLY) OPTION B: WINDSOR ALCOVE (DOOR ONLY) Applies to 750 and 900mm door sizes with acrylic base applications. Dotted Line: Outer boundary THIS IS A BRIEF OVERVIEW OF HOW TO SET UP A DOOR ASSEMBLY ONLY.

  • Page 6: Installation

    INSTALLATION Go to the layout plan on pages 4 and 5 to identify the category and size of shower you are installing. Find the applicable measurements and guidance notes that apply in your case. Using a soft pencil or masking tape mark out the outside boundary line on the base and up the walls with a spirit level.
  • Page 7 INSTALLATION Slide the Return Panel (3) over the extrusion on to the Front Door Assembly (4) at the leading corner. Ensure this is aligned correctly then drilled and screwed. DIAGRAM C: Using the sliding rails within the Front Door Assembly adjust them (in or out) to have both the Fixed Return Panel and Front Door Panel positioned on the boundary line.
  • Page 8 INSTALLATION Drill three equally spaced 3.2mm holes into the wall channels (1) and (2) on the INSIDE of the screen. Make sure that your drill holes are more than 20mm back from the glass edge when using the smallest screen size. Otherwise you risk breaking the glass (see Diagram E). Make sure that all the holes go though both the aluminium of the fixed side panel and the door front assembly.
  • Page 9 The screen is designed to allow the water to return into the shower area, if any is present. SCREENS THAT ARE SEALED ON THE INSIDE WILL VOID WARRANTY. CONTACT Freephone: 0800 002 299 Phone: 07 928 9990 Fax: 07 928 9999 Email: info@stein.co.nz www.stein.co.nz...