Page 2
If damage has occurred advise your supplier immediately and do not proceed with installation. DISCLAIMER Stein International Ltd are not liable for any Turtle Shell that has not been installed correctly. Turtle Shell cannot be returned or exchanged once it has been cut. INSTALLATION NOTES The Turtle Shell is manufactured from high grade acrylic and can easily be damaged or cracked or scratched if not handled with care.
Page 3
A 3 sided Alcove will need to be trimmed by measurement and a square as this cannot be positioned initially. Sand the edges that have been trimmed to so the Turtle Shell can slide into the F Rail. Mark and cut the remaining side that overhangs the frame.
Need help?
Do you have a question about the TURTLE SHELL and is the answer not in the manual?
Questions and answers