Configuration; Menu Structure And Configurable Parameters - Victron energy Color Control GX Manual

5. Configuration

5.1. Menu structure and configurable parameters

After completing the installation and setting up the internet connection (if required), go through the menu from top to bottom to
configure the CCGX:
Item
General
Access level
Remote support
Reboot?
Audible alarm
Demo mode
Firmware
Firmware Version
Online updates: Auto
update
Online updates: Update to
Install firmware from SD/USB
Stored backup firmware
Date & time
Date/Time UTC
Date/Time local
Change time zone
Remote Console - Read full feature description [17]
Disable password check
Enable password check
Enable on VRM
Remote Console on VRM -
Status
Page 21
Color Control GX Manual
Default
User and installer Set this to 'User' to prevent accidental and unwanted changes to
the configuration. Installer has additional privileges and once
changed from default requires a password. Password is available
from your dealer.
No No / Yes - Enable this to allow Victron engineers to access your
system in case there is a problem.
Reboots the GX device
Yes When there is an alarm on the CCGX or a connected product,
the CCGX will beep - unless this setting is set to 'Off'.
Disabled Demonstrates product and installation features to a client or at
an exhibition. This simulation mode will allow better
understanding without (yet) changing any settings. Note that this
will add simulated devices to a VRM installation. Demos for ESS,
Boat and Motorhome are available.
x.xx Displays the currently installed firmware version
Check only If this is Enabled, the GX device will check with the server to see
if there is a new version available. It is possible to set to disable,
or update automatically
Latest release Use the default setting unless you want to participate in test
versions. End-user systems should certainly be set to 'Latest
release'.
Use this menu to install a new version from a microSD card or
USB stick. Insert the card or stick that holds the new
firmware .swu file.
With this feature you can go back to the previously installed
firmware version.
Automatic from -
internet
Automatic from When connected to the internet, time will be automatically
internet synchronised regardless of this setting. Toggle this setting to
Manually input the time where no internet connection is present.
Select the correct local time zone.
Password authentication not required for remote console access.
Choose password to allow remote console access.
No No / Yes - Enabling on VRM will allow connection to the CCGX
from anywhere via the VRM portal.
Console on VRM
- Displays the connection state of the VRM Remote Console
Feature, eg Online, Offline, Disabled.
Description
Trouble shooting Remote
Configuration