Accessing Via Vrm - Victron energy Color Control GX Manual

Hide thumbs Also See for Color Control GX:

Table of Contents

Color Control GX Manual

This uses Universal plug-and-play broadcast technology.

4.2. Accessing via VRM

This method requires a working internet connection, both on your phone/tablet/laptop as well as for the Color Control GX. For a

new install, this means that it needs to be connected by Ethernet cable.

Step by step instructions:

First, connect the Color Control GX to the internet by plugging it into a working Ethernet network which has a DHCP server, as

most networks do, and which is connected to the internet. The Color Control GX will immediately connect to VRM.

Now, go to the VRM Portal, https://vrm.victronenergy.com/, and follow the instructions to add the device. More information about

this is available in the

VRM

Manual.

Then once visible on VRM, click the 'Remote Console' link to open the window. Which will look like below screenshot.

More technical information in the related troubleshooting chapter:

Remote Console on VRM - Trouble shooting

[47].

Page 19

Accessing the GX device

Table of Contents

Do you have a question about the Color Control GX and is the answer not in the manual?