5/ Troubleshooting; Tyxia 2330 Transmitter Switch - DELTA DORE PACK TYXIA 641 Installation Instructions Manual

5/ TROUBLESHOOTING

5.1 TYXIA 2330 TRANSMITTER SWITCH

Removing a motor or functional receiver
❶ Press the T1 button for 3 seconds,
then successively press the
to select the motor to remove.
❷ Press the
button:
The roller shutter starts up, the association is removed.
❸ Press the T1 button.
Removing all motors or receivers that are out of service,
missing from the site or switched off
❶ Press and hold the T1 button for 3 seconds.
❷ Press the
and
❸ Press the T1 button.
Reset / Removal of all motors or receivers
❶ Press and hold the T1 button for 3 seconds.
❷ Simultaneously press the
until the LED flashes once (red then green).
❸ Press the T1 button.
Battery replacement
The red LED flashes each time you press
= Battery fault
46
button
buttons.
and buttons,
2s
> 3s
> 3s
> 3s
...
...
...