Technical characteristics Contents • Power supplied by 3V lithium battery, CR2430 • Class III insulation • X3D Transmission frequency: 1/ Location/Mounting 868.7 MHz to 869.2 MHz 1.1 Mounted on the wall • Maximum radio power < 10 mW 1.2 Placed on a flat surface •...
2/ Wireless association This chapter allows you to associate a remote ❶ Activating association standby mode control with an X3D wireless motor or X3D roller - Motor: shutter receiver. 1) Upon turning on for the first time, if the motor was not associated before.
Page 5
2/ Wireless association 2.1.2 Several motors or receivers are in association 2.2 Associate multiple motors or receivers standby mode ❶ Set the motors (receivers) to association standby ❶ On the remote control press at the mode. same time and hold for 3 seconds, until the red ❷...
3/ Save the favourite positions 4/ Use • Press to control the roller shutter. You can save up to 2 favourite positions: The green LED indicates that the receiver has correctly received the information. ❶ ❷ Set the shutter to the required position e.g. ❸...
5/ Troubleshooting • The red LED flashes • Remove all associations several times every time - Remove the front face of the remote control. a button is pressed. - Press button A. The battery is low. The red LED flashes. Change the battery.