Technical characteristics Content • Power supplied by 3V lithium battery, CR2430 • Class III insulation • X3D Transmission frequency: 1/ Location/Mounting 868.7 MHz to 869.2 MHz 1.1 Mounted on the wall • Maximum radio power < 10 mW 1.2 Placed on a flat surface •...
1/ Location/Mounting 1.1 Mounted on the wall 1.2 Placed on a flat surface WARNING ! Do not ingest battery, chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
2/ Wireless association ❸ On the remote control press This chapter allows you to associate with one at the or more X3D wireless motor(s), roller shutter same time and hold for 3 seconds, until the LED receiver(s) or lighting receiver(s). flashes.
3/ Create a group Creating a group allows the simultaneous control of multiple receivers (or motors). ❶ Select the desired “Activity” by pressing , for three seconds until the symbol flashes. Release. ❷ Press as many times as required to select the number of the group to create (e.g.
4/ Use 5/ Troubleshooting ❶ Select the desired “Activity” by briefly pressing • The screen displays The battery is low. Change the battery. ❷ Press as many times as required to select the number of the group to control: : Groups 1 to 16 : Group Total ❸...