DELTA DORE TYXIA 1703 Manual

DELTA DORE TYXIA 1703 Manual

Advertisement

Quick Links

TYXIA 1703

Advertisement

Table of Contents
loading

Summary of Contents for DELTA DORE TYXIA 1703

  • Page 1 TYXIA 1703...
  • Page 2: Table Of Contents

    Technical characteristics Contents • Power supplied by 3V lithium battery, CR2430 • Class III insulation • X3D Transmission frequency: 1/ Location/Mounting 868.7 MHz to 869.2 MHz 1.1 Mounted on the wall • Maximum radio power < 10 mW 1.2  Placed on a flat surface  •...
  • Page 3: 1/ Location/Mounting

    1/ Location/Mounting 1.1 Mounted on the wall 1.2 Placed on a flat surface...
  • Page 4: 2/ Wireless Association

    2/ Wireless association This chapter allows you to associate a remote ❶ Activating association standby mode control with one or more X3D wireless motor(s), - Motor: X3D roller shutter receiver(s). 1) Upon turning on for the fi rst time, if the motor You can associate up to 16 receivers or motors.
  • Page 5: Associate Multiple Motors Or Receivers

    2/ Wireless association 2.1.2 Multiple motors or receivers are in association 2.2 Associate multiple motors or receivers standby mode and you only want to associate one ❶ Set the motors (receivers) to association standby ❶ On the remote control press at the mode.
  • Page 6: 3/ Save The Favourite Positions

    3/ Save the favourite positions 4/ Use • Press to control the roller You can save up to 2 favourite shutter(s). positions: The green LED indicates that the receiver(s) has/ ❶ ❷ Set the shutter to the required position have correctly received the information. (e.g.
  • Page 7: 5/ Troubleshooting

    5/ Troubleshooting • The red LED fl ashes • Remove all associations several times every time - Remove the front face of the remote control. a button is pressed. - Press button A. The battery is low. The red LED fl ashes. Change the battery.
  • Page 8 www.deltadore.com...

Table of Contents