Advertisement
Contents
Connections
No sound comes out
No sound comes out.
Check the connections for all devices. (v p. 13)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that a proper input source is selected. (v p. 21)
0
Adjust the volume. (v p. 26)
0
Make sure volume is not muted. (v p. 27)
0
No sound is produced from subwoofer.
When there is an obstacle between the sound bar and the subwoofer, remove it or place the subwoofer closer to the sound bar.
0
Make sure the subwoofer status display LED is lit in green. If lights are not lit, it may indicate that the sound bar and subwoofer are not wirelessly
0
connected. Perform connection again according to the following steps.
A Press the c button to turn on power to the unit.
B Press and hold the subwoofer BAR SYNC button for 3 seconds or more.
The subwoofer status display LED blinks once in green.
C Press and hold the sound bar g and + buttons for 5 seconds or more until the subwoofer status LED will stop flashing.
The sound bar and subwoofer wirelessly connect. Perform steps A to C again if they do not connect.
Playback
Settings
33
Tips
Appendix
Advertisement
