Advertisement
Contents
Connections
Power does not turn on / Power is turned off
Power does not turn on.
Check whether the power plug is correctly inserted into the power outlet. (v p. 20)
0
If the power of this unit cannot be turned on with the HDMI control function of the TV, press the c button to turn on the power of this unit. (v p. 37)
0
If the power cannot be turned on through a Bluetooth and Wi-Fi connection, this is in the deep standby mode. Press the c to turn on power to the unit.
0
(v p. 28)
Power automatically turns off.
If no operations have been performed for 15 minutes or more and audio is not being input, this device automatically switches to standby.
0
Turn this device's power on again. To prevent the power from turning off automatically, turn off the auto standby function. (v p. 28)
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
Battery is worn out. Replace with new battery. (v p. 5)
0
Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. (v p. 5)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the battery in the proper direction, checking the f and e marks. (v p. 5)
0
The set's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
0
remote control sensor will not be exposed to strong light.
Playback
Settings
32
Tips
Appendix
Advertisement
