Advertisement
Contents
Connections
Automatically setting to standby (Auto
standby function)
Switch the auto standby function on or off.
When the auto standby function is turned on, the power supply for this
device automatically switches to standby if no operations have been
performed for approx. 20 minutes or more and audio is not being output.
1
Press and hold the NIGHT button for 5 seconds or
more.
The auto standby function switches on or off and the status
0
display LED blinks as indicated below.
On
Auto
(Default)
standby
function
Off
Playback
This unit can be placed into deep standby mode, in which its standby
power consumption is lower than in normal standby mode. Perform the
following steps to put this unit into deep standby mode.
1
(Green)
Gree
(White)
White
0 When you press the c this unit enters normal standby mode.
(Red
(Red)
Red
(White)
Whit
White
0 When this unit is in deep standby mode, it cannot be turned on by performing
0 The automatic software update function is also disabled.
0 When in normal standby mode, if this unit is not connected to a Wi-Fi network for a
28
Settings
Tips
Reducing the standby power
consumption (Deep standby function)
Press and hold the c for about 5 seconds or more.
All of the status display LEDs blink in white 3 times before turning
0
off and the unit enters deep standby mode.
Deep
standby
function
NOTE
streaming operations with a Chromecast-enabled music app or with a Bluetooth
connection.
continuous period of 60 minutes or more due to a problem with an external device
such as a router or with the Wi-Fi environment, this unit automatically enters deep
standby mode.
Appendix
(White)
Advertisement
