tams elektronik Multi-Timer Manual page 35

Multi-Timer
Setting the switching times
You set the swtching times and with operation mode 4 the starting and
braking delay as well as the voltage supply when starting at the four
trim-pots related to the outputs. When setting the trim-pot as far as it
will go to the right you will define the maximum value.
Please notice that with operation mode 3 "random switch" not the
maximum toggling time is set, but the time interval, which elapses
before the Multi-Timer decides at random if to toggle the output or
not.
Operation Trim-pot 1
mode → output 1
1
2
3
4 Length of
Trim-pot 2
→ output 2
Time interval between two decisions to toggle or not
Length of
time for
braking
Trim-pot 3
→ output 3
Switching time
Delay time
Length of
stay time for
starting
English
Trim-pot 4
→ output 4
Voltage at
the track
when
starting
Page 35