Connection With Operation Mode 4 - tams elektronik Multi-Timer Manual

Multi-Timer

7.4. Connection with operation mode 4

For use as a start-brake-stopover switch you have to isolate the rail
section to be controlled by the Multi-Timer from the remaining layout.
These can be e.g.:

rail sections with a signal stop (e.g. block sections)

flag stops
Here cut with 3-rail systems the middle conductor and with 2-rail
systems the same conductor you have cut for other applications. In
addition, you can cut off a security section switched currentless when
the signal is set to "Stop".
English
Page 31