Operation Mode 3 "Random Switch - tams elektronik Multi-Timer Manual

Multi-Timer English
delay the switching pulse so that the train does not stop before the
reed contact will not be released any more.

4.3. Operation mode 3 "Random Switch"

 Use in analogue or digital layouts
The 4 outputs of the Multi-Timer are switched separately for a time at
random. The time interval after which the random generator decides
whether to release a switching operation or not, can be set for each
output individually via a trimpot, the maximum interval is 4,5 minutes.
The downstream circuit can stay switched on or off for several time
intervals (maximum 10)
When connecting switches (or similar circuits) to the switching inputs of
the Multi-Timer, the random control can be affected manually. As soon
as the contacts of the switching inputs are closed (= on), the current
state of the related output will be "frozen" and the random switch has
no more influence on the output. The output will be controlled by the
random switch only after the contacts of the switching input are opened
again (= out).
Application
You can apply the operation mode 3 for all actions to be switched on
and off at random.
Page 13