tams elektronik Multi-Timer Manual page 16

English Multi-Timer
2. The locomotive stops in front of the signal until the hold time has
expired (and switching input 1 has been switched to "open"
automatically) or until switching input 1 has been opened (e.g. by
means of an external switch).
By closing switching input 3 (e.g. by means of an external switch) while
keeping switching input 1 closed at the same time, you can prolong the
hold time and prevent switching input 1 from automatically been
opened after the halting has expired. If switching input 3 is opened
before the set hold time has expired, the automatic operation will be
restarted after the hold time has expired.
Page 16