Safety Instruction - NewLine RS Plus Series Quick Start Manual

For your safety, please read the following instruction before you use the product. Serious injury or property
damage may be caused by improper operations. Do not try to repair the product on your own.
Disconnect the product from the power supply immediately if major failures occur.
Major failures include the following:
 If smoke, a peculiar smell or an abnormal sound is discharged from the product.
 No image or sound is displayed, or the image error occurs.
In the preceding scenarios, do not continue to use the product. Disconnect power supply
immediately and contact professional staff for troubleshooting.
Do not drop any liquids, metal or anything combustible onto the product.
 If any liquid or metal are dropped onto or into the product, power off the product and
disconnect the power supply, Then contact professional staff for solutions.
 Pay attention to children when they are close to the product.
Put the product on a stable surface.
An unstable surface includes, and is not limited to an inclined plane, a shaky stand, desk or
platform, that might cause the product to turnover and be damaged.
Do not open the panel or change the product on your own.
High voltage components are installed in the product. When you open the panel , high voltage,
electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor for help.
Use the provided power supply.
 To prevent the product from being damaged, do not use any types of power cables other than
the one provided with the product.
 Use a three-wire socket and ensure that it is properly grounded.
 Pull out the power plug from the socket if the product is not used for a long period.
Clean the power plug regularly.
 Fire or electric shock may be caused if the product is powered on, while you are cleaning.

Pull out the power plug before cleaning it with a dried cloth.
Power output port is 5V/2A
The voltage/current of the rear power output port is 5 V/2 A (maximum). Purchase the power
code/AC adapter according to customer needs. Please do not connect any products with different
power requirement. Otherwise, it may cause damage to products or fire.

Safety Instruction

3