ESAB Cutmaster 120 Operating Manual page 5

The Low Voltage Directive 2014/35/EU, entering into force 20 April 2016
The EMC Directive 2014/30/EU, entering into force 20 April 2016
The RoHS Directive 2011/65/EC, entering into force 2 January 2013
Type of equipment
PLASMA CUTTING SYSTEM
Type designation etc.
ESAB Cutmaster® 120, from serial number 845-xxx-xxxx
Brand name or trade mark
ESAB
Manufacturer or his authorised representative established within the EEA
Name, address, telephone No:
OZAS-ESAB Ltd.
ul. A. Struga 10,
45-073 Opole, Poland
Phone: +48 (0) 77 4019270, FAX +01 603 298 7402
The following harmonised standard in force within the EEA has been used in the design:
IEC/EN 60974-1:2017 / AMD1:2019 Arc Welding Equipment - Part 1: Welding power sources.
IEC/EN 60974-10:2014 / AMD1:2015 Published 2015-06-19 Arc Welding Equipment - Part 10: Electromagnetic
compatibility (EMC) requirements
Additional Information: Restrictive use, Class A equipment, intended for use in location other than residential.
By signing this document, the undersigned declares as manufacturer, or the manufacturer's authorised
representative established within the EEA, that the equipment in question complies with the safety re-
quirements stated above.
Date
20 August 2019
2019
DECLARATION OF CONFORMITY
According to
Signature
Flavio Santos
Position
General Manager
Accessories and Adjacencies