Page 1
FUSION ® Apollo MS-SRX400 ™ O W N E R ’ S M A N U A L ® ENGLISH F U S I O N E N T E R T A I N M E N T . C O M...
Page 2
Garmin ® , Fusion ® , and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Apollo ™ , Fusion-Link ™ , Fusion PartyBus ™...
Adjusting Additional Audio Settings for a Zone Power Options Source Settings Network Settings Connecting the Fusion PartyBus Device to a Wireless Access Point Connecting the Device to a Wireless Access Point Using Wi‑Fi Protected Setup Connecting the Device to a Wireless Access Point Using...
• Press and hold to turn off the stereo. You should enter a unique name for this device so you can • Press and hold to open the power menu. easily identify it when viewing devices on the Fusion PartyBus ™ • Press to open the menu.
Turn the dial to adjust the volume for the home zone on the Open the Fusion-Link remote control app on your compatible stereo. Apple or Android device. If necessary, press the dial to switch between zones. If necessary, select the stereo you want to configure.
PLAYLIST: Displays the playlists on the device. NOTE: You cannot stream the AIRPLAY source to other stereos on the network using the Fusion PartyBus network ARTISTS: Displays the artists on the device. (Fusion PartyBus Networking, page 4).
• You cannot share an AirPlay source with grouped stereos. Using AirPlay 2 software, you can play content on multiple You can connect up to eight Fusion PartyBus stereos on a stereos on the network, but the stereos must not be grouped network wirelessly.
Select the Fusion PartyBus wireless access point. The setting applies to both subwoofer outputs. If necessary, select PASSWORD, enter the password, and NOTE: If a DSP setting has been applied using the Fusion-Link select app, this setting cannot be changed on the stereo.
Marine Network, you are limited to using only Garmin and while pairing. Fusion devices. You may not be able to use third-party routers, Open the Fusion-Link Lite app on the watch. storage devices, or other network products with this stereo The first time you open the app on the watch, the watch directly.
Network Troubleshooting Apple App Store or the Google Play store. If you cannot see or connect to Fusion PartyBus devices on the network, check the following: Updating the Software Using the Fusion Link App You must connect the Fusion-Link app to the network using a •...
• Reset the Apple device. Go to www.apple.com for more information. • Contact your Fusion dealer or send an email to Fusion from www.fusionentertainment.com. 110 mm (4.33 in.) My Apple AirPlay audio is interrupted by short breaks 100 mm (3.94 in.) •...
Apple devices 6, 7 backlight 1 bass 2 Bluetooth devices 2, 3, 7 device cleaning 8 registration 8 DSP 2 factory settings 7 FM 3 Fusion PartyBus 7 Fusion PartyBus network 5, 6 FUSION-Link 8 Garmin Marine Network 7 groups 4 creating 4 editing 4 home zone 5 icons 9 keys 1 language 4 mute 2 name 1 network 3, 4, 6–9 network configuration 7...
Page 16
FUSION SUPPORT New Zealand 09 369 2900 Australia 1300 736 012 Europe +44 (0) 370 850 1244 623 580 9000 Pacific +64 9 369 2900 ® F U S I O N E N T E R T A I N M E N T . C O M...
Need help?
Do you have a question about the Apollo MS-SRX400 and is the answer not in the manual?
Questions and answers