Page 1
FUSION ® Apollo MS-SRX400 ™ O W N E R ’ S M A N U A L ® ENGLISH F U S I O N E N T E R T A I N M E N T . C O M...
Page 2
Garmin ® , Fusion ® , and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Apollo ™ , Fusion-Link ™ , Fusion PartyBus ™...
Adjusting the Tone Adjusting Additional Audio Settings for a Zone Power Options Network Settings Connecting the Fusion PartyBus Device to a Wireless Access Point Connecting the Device to a Wireless Access Point Using Wi‑Fi Protected Setup Connecting the Device to a Wireless Access Point Using...
◦ Press and hold for faster tuning (manual mode only). You should enter a unique name for this device so you can easily identify it when viewing devices on the Fusion PartyBus ™ For information about controlling sources from a grouped stereo, network.
Turn the dial to highlight a source. You can adjust the subwoofer level for each zone. NOTE: If the is device part of a group on the Fusion PartyBus Press the dial to open the CONTROL screen. network, continue turning the dial to access the sources on Turn the dial to select a zone.
Configure the DSP settings as needed, depending on the REPEAT OFF: Sets the repeat mode for the current selection. models of Fusion speakers and amplifiers connected to the You can repeat the current selection by selecting the zone.
Fusion PartyBus network. From the music app or program, select , and select You can connect up to eight Fusion PartyBus stereos on a the name of the stereo. network wirelessly. If necessary, start playing music on the app.
WI-FI OFF: Turns off all Wi‑Fi wireless functions. ® the Fusion PartyBus network for some sources, and name the sources. You may want to disable streaming some WI-FI CLIENT: Configures the stereo as the wireless client, sources, such as AM, because streaming over the Fusion allowing it to wirelessly connect to other devices.
> SETTINGS > NETWORK > ADVANCED > DHCP • If the stereo is connected to a wireless network, you can SERVER. update the software using the Fusion-Link app on a mobile DHCP ENABLED: Sets the device as the DHCP server on the device.
Apple or Android device. To download the app and update the device software, go to the If you cannot see or connect to Fusion PartyBus devices on the Apple App Store or the Google Play store.
• Reset the Apple device. Go to www.apple.com for more information. • Contact your Fusion dealer or send an email to Fusion from www.fusionentertainment.com. My Apple AirPlay audio is interrupted by short breaks • Make sure the Apple device is not covered or obstructed.
Page 14
10 mm (0.39 in.) 110 mm (4.33 in.) Appendix...
Apple device 9 Apple devices 6, 7 backlight 2 bass 5 Bluetooth devices 3, 7 device cleaning 8 registration 8 DSP 2 factory settings 7 FM 3 Fusion PartyBus network 5, 6 FUSION-Link 7 Garmin Marine Network 7 groups 1, 4 creating 4 editing 4 icons 8 keys 1 language 5 mute 2 name 1 network 2, 4, 6–8 network configuration 7 PartyBus 6, 7...
Page 16
FUSION SUPPORT New Zealand 09 369 2900 Australia 1300 736 012 Europe +44 (0) 370 850 1244 623 580 9000 Pacific +64 9 369 2900 ® F U S I O N E N T E R T A I N M E N T . C O M...
Need help?
Do you have a question about the Apollo MS-SRX400 and is the answer not in the manual?
Questions and answers