Advertisement
Failure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poor product performance.
See the Important Safety and Product Information guide in the stereo box for product warnings and other important information
NOTICE
This device does not contain any user-serviceable parts. Unauthorized repairs or modifications could result in permanent damage to the equipment and void your warranty and your authority to operate this device.
You can mount the device using the adhesive pad (included) or using a screw (not included). To use a screw, you will need these tools and hardware.
You should select a mounting location that allows the best range for Bluetooth® audio streaming.
Before you install any equipment, disconnect the vessel's power supply. Remove the lead from the battery. Investigate the location of the vessel's fuel tanks and electrical wires. Protect wires to prevent damage.
Mounting with the Adhesive
You can mount the device using the adhesive.
Mounting with a Screw
You can mount the device using a screw instead of the adhesive.
NOTICE
To avoid damage the device, do not over tighten the screw.
BT100 | |
Stereo amplifier-on signal wire | |
Power connection, 10 to 16 Vdc | |
Ground wire | |
Red RCA plug connected to red AUX IN plug | |
White RCA plug connected to white AUX IN plug | |
Stereo |
Connection | Wire or Plug Color / Notes |
Ground (-) | Black. Connect this wire first, to the same ground connection as the stereo (usually a black wire). |
Power (+) 10 to 16 Vdc | Red. To protect your BT100 electrically, connect to the Amplifier On wire (usually blue) on the stereo. If connecting directly to a 12 Vdc power supply, install a power switch and a 2 A fuse between the power supply and the BT100. |
Left audio channel | White RCA plug. Connect to the white Aux In RCA socket on the stereo. |
Right audio channel | Red RCA plug. Connect to the red Aux In RCA socket on the stereo. |
The BT100 device allows you to play audio from a compatible Bluetooth device over the stereo system.
Refer to the user manual for your Bluetooth device to learn how to enable discoverable mode. The BT100 does not require a PIN to pair.
Turn off and on the stereo system and the BT100 device to disconnect from any previously paired Bluetooth devices and enable discoverable mode.
After pairing your Bluetooth device with the BT100 device, you can use your Bluetooth device to select and play music on your stereo over Bluetooth wireless technology. The controls on the stereo do not control the BT100 device. You must select music and playback options from your Bluetooth device.
My music is not playing over the stereo system
When I play music on my Bluetooth device, there is no audio output through the stereo system.
I am unable to find the BT100 device on my Bluetooth device
Cable length | 1.5 m (5 ft.) |
Water and dust rating | IEC 60529 IP65 Sealed against all dust ingress, and protected against jets of water. |
Bluetooth | A2DP V3.0 Class 2 |
Operating range | Up to 10 m (33 ft.) |
Dimensions (H x W x D) | 59 x 42 x 15 mm ( 2.4 x 1.7 x 0.6 in.) |
Input voltage | 10 to 16 Vdc |
Operating current | 20 mA |
Wireless frequency | Bluetooth 2.4 GHz @ 5 dBm nominal |
Compass-safe distance | 5 cm (2 in.) |
Help us better support you by completing our online registration today.
© 2019 Garmin Ltd. or its subsidiaries
Garmin®, the Garmin logo, FUSION®, and the Fusion logo, are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.
The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the MS-BT100 that isn't answered in the manual? Leave your question here.