Table of Contents
Advertisement
Octaire Control Panel Operation
Changing Virtual Matrices (Routing Levels)
The Octaire system supports three routing levels (virtual matrices) for switching signals:
All (Audio-follow-Video), Video, and Audio.
Occasionally you may need to execute switches (or perform other operations) using a routing level other
than the current one. The directions below give the steps to change from routing signals on All to routing
on Audio.
To change the virtual matrix (routing level):
1.
Press the Function Key.
The Function menu appears.
2.
Locate Virtual Matrix by scrolling with the Control Dial.
3.
Press the Select Key.
The V.Matrix list appears.
4.
Scroll the Control Dial to Audio.
5.
Press the Select Key to enter your selection.
The display returns to the top of the V.Matrix submenu.
Audio becomes the new routing level used for all operations.
6.
Press the Function Key to return to the Function menu.
The system is ready to perform operations on the Audio routing level. The system will remain on
Audio for all operations until the routing level is changed or the power is cycled (at which time the
Control Panel will switch on the default routing level).
Note: To change the default virtual matrix, see the instructions on page 60.
48
Current routing level
Newly selected level
Octaire Instruction Manual
Advertisement
Table of Contents
