AMX Octaire Instruction Manual page 45

Signal Types & Specifications
Ultra-Wideband Video
Ultra-Wideband (RGBHV) Signal Specifications
Frequency Response
Crosstalk
Signal to Noise Ratio
Return Loss
Input Level (max.)
Input Impedance
Output Level (max.)
Output Impedance
Connectors
Sync
Sync Signal Specifications
Input Level Signal Range
Input Impedance
Input Trigger Voltage*
Input Polarity
Output Level Signal Range
Output Impedance
Output Polarity
Connectors
* The input trigger voltage specification indicates the point which determines if the HV sync pulse is high or low.
An incoming sync signal below +1.75 V will be interpreted as low, and an incoming sync signal above +1.75 V will
be interpreted as high.
40
Fully loaded
Fully loaded
Fully loaded
f = 1 MHz
f = 5 MHz
f = 10 MHz
f = 30 MHz
f = 100 MHz
f = 150 MHz
Vin = 0.7 V, 100 IRE
f = 5 MHz
Output polarity follows input polarity Active high or low
Output polarity follows input polarity Active high or low
±3 dB, >600 MHz average
±3 dB, 500 MHz or better
±1.5 dB, 150 MHz or better
<-80 dB
<-79 dB
<-74 dB
<-71 dB
<-60 dB
<-52 dB
>65 dB
<-45 dB
±1.0 V
75 ohms
±1.0 V
75 ohms
BNC
0 to +5 Volts
510 ohms
+1.75 V
0 to +5 Volts
50 ohms
BNC
Octaire Instruction Manual