Specifications - AMX Modero ViewPoint MVP-7500 Operation/Reference Manual

To fully utilize wireless security features, this card must be used in tandem with the
latest Modero firmware upgrade available at www.amx.com.
This upgrade kit requires that pre-existing panels first be removed from their current location (tabletop or
wall docking station) before an installer can access the internal circuit boards and upgrade a pre-existing
802.11b wireless CF card.
MVP panels require the use of a cardboard cutout (Mounting Template) to properly position the metal
antenna plate onto the inner surface of the unit's rear plastic housing. The procedures for upgrading a CF
card on an MVP is identical for both MVP-7500 and MVP-8400 panels.

Specifications

NXA-WC80211GCF Specifications
Dimensions (HWD):
Weight:
Description:
Antenna Type:
Bus Interface:
Certifications:
Media Access Control
Techniques:
Network Architecture:
Operating Channels:
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Supports authentication methods such as: EAP-FAST, EAP-LEAP, EAP-PEAP, EAP-TLS,
and EAP-TTLS
Supports Wired Equivalent Privacy (WEP) 64-bit and 128-bit data encryption (known to the
on-board firmware as Static WEP)
The NXA-WC80211GCF is backwards compatible with 802.11b networks.
• 0.22" x 1.68" x 2.40" (5.6 mm x 42.80 mm x 61.0 mm)
• 19.50 grams (0.043 lbs)
• Wireless LAN Compact Flash Card with external PIFA antenna.
• Features enterprise-class security such as WPA and WPA2 security.
•
• External PIFA antenna (factory-installed)
• Compact Flash Type I
• FCC Part 15 Class B, CE, IC, TELEC, and Wi-Fi
• Using 802.11b DSSS communication:
DBPSK @ 1 Mbps
DQPSK @ 2 Mbps
CCK @ 5.5 Mbps
• Using 802.11g OFDM communication:
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
• Infrastructure mode (Client-to-Access Point)
• Using 802.11b & g communication:
- 04: (Ch 10 - 13) - France
- 11: (Ch 1 - 11) - North America
- 13: (Ch 1 - 13) - Europe ETSI
- 13: (Ch 1 - 13) - Japan (802.11g)
- 14: (Ch 1 - 14) - Japan (802.11b)
Note: To alter the card's default country code (North America), contact an AMX
Technical Support representative for detailed procedures and information.
Wireless Interface Cards
13