Mvp-Bp Power Pack; Overview; Mvp-Bp Specifications; Installing Mvp-Bp Batteries - AMX Modero ViewPoint MVP-7500 Operation/Reference Manual

MVP-BP Power Pack

Overview

The MVP-BP Power Pack (FG5965-20) is a rechargeable Lithium-Ion battery used to provide power to
the MVP touch panels.
FIG. 3 MVP-BP Power Pack
MVP-BPs can be charged with either a Table Top Docking Station (MVP-TDS), Wall/Flush Mount
Docking Station (MVP-WDS), or MVP panel itself. Extra MVP-BP Power Packs can be purchased
separately.

MVP-BP Specifications

MVP-BP Specifications
Dimensions (HWD):
Power (Voltage):
Weight:
Charge Capacity:
Operating/Storage Environments: • Operating Temperature: 0° C (32° F) to 40° C (104° F)

Installing MVP-BP Batteries

1. Disconnect any cables, and place the MVP face down to expose the battery compartment.
2. Press down on the traction grooves to slide the battery compartment cover (away from the metal
plate), to open the battery compartment.
3. Insert the MVP-BP(s) so that the connector makes contact with the battery pins at the end of the
battery slot as shown in FIG. 4.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
One MVP-BP is included with each MVP-7500 touch panel.
Two MVP-BPs are included with each MVP-8400 touch panel.
0.48" x 1.52" x 8.65" (1.23 cm x 3.86 cm x 21.97 cm)
7.2 Volts (nominal)
0.40 lbs (0.18 kg)
3600mAh
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
MVP-BP Power Pack
5