Huawei FusionServer Pro 2488H V6 Technical White Paper page 62

Huawei FusionServer Pro 2488H V6 Server
Technical White Paper
NVMe Drive Indicators
Figure 5-34 NVMe drive indicators
Table 5-18 NVMe drive indicators
Activity Indicator
(Green)
Off
Steady on
Blinking at 2 Hz
Off
Off
Steady on/Off
M.2 FRU Indicators
The server supports the Avago SAS3004iMR RAID controller card, which supports
two M.2 FRUs.
Figure 5-35 M.2 FRU indicators
Issue 03 (2021-02-01)
Fault Indicator
(Yellow)
Off
Off
Off
Blinking at 2 Hz
Blinking at 0.5 Hz
Steady on
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Description
Description
The NVMe drive is not detected.
The NVMe drive is detected and
operating properly.
Data is being read from or written to
the NVMe drive.
The NVMe drive is being located or
hot-swapped.
The NVMe drive has completed the
hot swap process and is removable.
The NVMe drive is faulty.
55