Table of Contents
Advertisement
Replacing batteries
Proceed as follows:
•
Unlock and slide open the battery case cover
•
Replace the battery.
Make sure the battery is the right way round !
•
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Pro-Ject MaiA DS2
Frequency response:
Power Output @ THD+N=1%:
Channel separation:
Noise floor:
THD+N:
Gain:
Line level inputs:
Line input sensitivity:
Line input sensitivity + 6 dB:
Line input impedance:
Phono input:
Phono input sensitivity:
Phono input impedance:
20Hz - 45kHz (max. deviation -0,1dB +0,2dB)
2 x 135W/4 ohms and 2 x 78W/8 ohms
> 70dB at 10kHz
> -85dB (20Hz – 20kHz)
< 0,08% @ 3W
28 dB (measured via line level input), + 6 dB
3 pairs RCA cinch connectors
1V (78W/8 Ohms)
500mV (78W/8 Ohms)
50kohms
1 pair RCA
suitable for MM, MI and MC cartridges
MM 47k ohms / MC 100 ohms
© Pro-Ject Audio Systems · Pro-Ject MaiA DS2 · Revision 22.04.2021
7
Advertisement
Table of Contents
