decorflame MM645PT-46FBK Instruction Manual page 3

Step 1: Attach 55 plastic connectors [X] to panels B, C, E, F, G, J, K, L, M, Q and R with 110
long screws [W] (2 screws for each connector). See Fig. A.
NOtE: If the screw(s) do not fit during assembly, loosen the 2 screws to adjust the plastic
connector until the panel/screws can be installed.
Step 2: Attach 8 shelf support pins [S] to panels L, M, Q and R. See Fig. B.
Fig. A
Fig. B FrONt
Step 3: Attach panel K to panel H with 3 long screws [W]. See Fig. C.
Step 4: Attach panel J to panel H with 3 long screws [W]. See Fig. D.
Step 5: Attach panels L and M to panel H with 6 long screws, as shown in Fig. E.
Step 6: Attach panels Q and R to panel H with 4 long screws [W]. See Fig. F.
3
Fig. C FrONt
Fig. D FrONt
Fig. E Back
Fig. F FrONt