Commissioning; Unpacking; Mounting The Monitor Stand; Setup - PCE Health and Fitness PCE-OVM 3D User Manual

Table of Contents

4 Commissioning

⇒ Remove the device and accessories from the shipping box.

⇒ Check the delivery for completeness (compare with the scope of

delivery).

⇒ Place a soft pad on a flat surface.

⇒ Place the monitor on the pad, the screen facing down.

⇒ Remove the protective film from the stand.

⇒ Attach the supplied stand to the monitor support.

Select a workspace with sufficient lighting for the installation of the PCE-OVM 3D system. If fluorescent light is used,

it may be necessary to reduce the light emission. Reflections of extraneous light on the object may result in

interferences.

⇒Place the desk pad (12, Fig. 1) on the working table.

The surface structure and color of the desk pad have been selected to reduce irritation to the eye,

which could occur with a structured surface.

4.3.1 Mounting the Support Arm

The support arm should preferably be mounted on the back or side of the

table top, at least 400 mm (15.75 in) away from the front edge.

This makes it possible to optimally utilize the entire swiveling range of the

support arm.

⇒ Mount the base with the universal clamp on the back or side of the work table (Fig. 4).

The universal clamp is suitable for tables with a slab thickness of 18 – 74 mm (0.71 – 2.91

in). Refer to chapter 3.4 for more mounting options.

⇒ Insert the support arm (2) into the base. Make sure that the red plastic disc (30) is placed

between the base and the support arm.

The power supply cable for the head is integrated into the support arm; the

cables for the mouse, foot switch, and monitor have already been guided

through the cable channel on the back of the support arm.

⇒ Place the mouse (11, Fig. 1) next to the desk pad.

⇒ Place the foot switch (10, Fig. 1) under the table and insert the cable for

the foot

switch into the foot switch.

Fig. 3

Fig. 6

Table of Contents