Other
Picture mode (Mode)
Select the picture mode (PC/games/movie)
Audio Volume – NOT available
Adjust the volume.
Signal Source
Select the signal source (VGA/DVI).
Select DVI for use with the PCE-OVM 3D system.
Aspect Ratio
Select the aspect ratio (16:9/AUTO/4:3).
DCR
Select DCR (Dynamic contrast ratio) (on/off).
Fig. 22
Reset
Reset
Reset the monitor settings to the PCE Instruments factory settings.
Fig. 23
Self-Diagnosis
If there is no image, a self-diagnosis window is displayed.
The self-diagnosis function checks whether a signal is present.
"No Input Signal" is displayed when the D-Sub connector is plugged in, but the
monitor is in DPMS mode, or when the analog signal cable is not plugged in.
Fig. 29
21