Table of Contents
Advertisement
6 Monitor
PCE Instruments recommends not changing the factory settings of the monitor as the basic settings for PCE-OVM
3D.
6.1 Safety Instructions
Commissioning
► Do not close off the ventilation openings.
► Place the monitor in a well-ventilated place to avoid overheating.
► Only use accessories specified by the manufacturer or included with the monitor.
► Select a location where the monitor will not be exposed to extreme temperatures, high humidity, direct
sunlight, or dusty environments. Avoid proximity to equipment that generates strong magnetic fields.
Water and moisture
► Do not operate the monitor near water. To reduce the risk of fire and electric shock, do not expose the
monitor to rain or moisture.
Power cord and power cord connection
► Install the power cord so that it will not be walked on or damaged. Note the location of the cables, plugs,
sockets, and of the connector at the monitor.
Product care
► Do not touch the screen directly with your fingers. Grease from the skin may leave fingerprints on the
screen, which are difficult to remove and can damage the screen. Do not put any pressure on the screen.
Cleaning
► Clean only with a dry cloth.
Repair
► Do not repair the monitor yourself. High voltages are exposed when the cover is opened or removed.
There is danger of electrical shock. Repairs must be carried out by qualified personnel only.
Lightning strike
► For extra safety during a thunderstorm, or when the monitor is left unattended or unused for a long time,
unplug the power cord of the power supply and the monitor cable. This prevents damage to the monitor due
to lightning strikes and power surges.
Mains connection
► Do not remove the ground or the protective conductor connection from the mains plug of the power
supply unit.
► Unplug the power supply unit when the monitor is not used for an extended period of time, or if the power
cord, power plug, or monitor housing is damaged.
Caution
► Do not try to open the product. Any attempt to open the product or remove the cover will void the
warranty and may result in serious injury.
6.2 Connections
40
DC 12 V 3.33 A
41
DVI input
42
VGA input
40
41
42
Fig. 17
19
Advertisement
Table of Contents
