Electrical Connection - PCE Health and Fitness PCE-OVM 3D User Manual

4.4 Electrical Connection

Several plugs and related connector sockets are marked with a color coding. When connecting the
components, make sure that the color coding matches. Improperly connected components can be damaged
by too high voltage.
4.4.1 Connections on the Head
The cables are connected at the back of the head.
⇒ Monitor cable ==> HDMI connection (21).
Plug the HDMI cable (36) into the retaining clip and then plug it straight
into the
socket.
⇒ Foot switch cable ==> connection (23).
⇒ Mouse cable ==> connection (24).
⇒ USB memory stick ==> connection (22).
⇒ Network extension cable ==> connection (25).
⇒ Power supply of the head (integrated into the support arm) ==> connection
(20).
4.4.2 PCE-OVM 3D Head Power Supply
The PCE-OVM 3D power supply (4, Fig. 1) has a cable with an angled jack plug (37).
⇒ Plug the jack into the socket at the cable of the power supply, which protrudes at the base of the
support arm.
Make sure that the color coding of the connection cable and socket matches.
Never plug the jack plug into the connection for the foot switch (23, Fig. 12).
This will destroy the head.
⇒ Insert the power cord into the power supply unit and into the building wall socket.
4.4.3 Connecting the Monitor
⇒ Monitor cable ==> DVI input of the monitor (41).
⇒ Secure plug with integrated screws.
⇒ Power supply ==> DC 12 V (40). The monitor power supply (5, Fig. 1)
has a cable with a hollow plug.
Ensure that the color coding of the connection cable and the socket matches.
⇒ Insert the power cord into the power supply unit and into the building wall socket.
Fig. 12 a
40
41
Fig. 14
Fig. 12b
37
Fig. 13
11