Advertisement
OPERATION
Charging the flosser
1.
Plug the power cord into the charging port.
2.
Plug the power cord into a power outlet.
3.
The charging indicator on the main body will begin blinking.
Note: The water flosser will take approximately 4 hours to fully charge.
4.
When the water flosser is fully charged the indicator light will be stop blinking and
remain on.
Nozzle
1.
Ensure the appliance is turned off.
2.
Insert the nozzle into the hole on the top cover.
3.
If need to remove or replace the nozzle, ensure the appliance is off then press the
nozzle release button and remove the nozzle by pulling upwards (Figure 1).
Figure 1
Advertisement
