Advertisement
Filling the water flosser
1.
Open the water tank lid.
2.
Holding the main body horizontally fill the water tank with clean water (Figure 2).
3.
Close the water tank lid.
Note:
Do not fill the water tank with water exceeding 40°C.
Using the water flosser
1.
Press the Power button to begin the flow of water.
2.
Holding the water flosser vertically, insert the nozzle into your mouth, aiming the
flow of water at your gums or teeth.
3.
Ensure the nozzle is kept parallel to your teeth and gums. Do not aim the nozzle
directly into the periodontal pocket (Figure 3)
4.
Keep your mouth slightly open allowing the water to flow out into your sink (Figure
4).
5.
The water flosser will automatically turn off after 2 minutes. If you need to continue
using the flosser press the Power button to start the flow of water again.
Figure 2
Figure 3
Figure 4
Advertisement
