Table of Contents
Advertisement
OPERATION
1.
Ensure to charge the device before using for the first time.
2.
Open the water inlet of the Water Tank and fill it with water. Close the inlet
window of the tank and press tightly.
Note: The water tank is detachable and can be removed for filling water.
Do not power on the flosser when the tank is removed.
3.
Insert the Jet Tip into the top head socket. To replace or remove the Jet Tip, press
the Jet Tip Lock/Unlock Button.
4.
Press the On/Off Button for 3 seconds to turn on the flosser. Press the Mode
button to select the working mode.
5.
Press the Mode button on the handle to select the appropriate cleaning mode for
the first-time use. You can also choose the cleaning mode according to your
dentist guidance.
Normal mode
Soft mode
Pulse mode
DIY
Pull out
Retractable
This is a standard cleaning mode. It can
effectively remove the food residue in the
gaps between your teeth. Deeply clean teeth.
Keep the mouth fresh.
This provides gentle massage to gums.
This provides pulse massage to gums and
promotes blood circulation.
In this mode, you can customise the cleaning
intensity according to your personal
preference and set various cleaning strengths
within the range
Advertisement
Table of Contents
