Advertisement
Quick Links
Advertisement
Related Manuals for Kogan Cordless Portable Travel Water Flosser
Summary of Contents for Kogan Cordless Portable Travel Water Flosser
- Page 1 CORDLESS PORTABLE TRAVEL WATER FLOSSER KACLPRWTFLA...
-
Page 3: Safety And Warnings
Do not operate any appliance with a damaged charger, cord or plug or after the • appliance malfunctions or has been damaged or dropped into water. Cease use immediately and contact Kogan.com for support. Do not expose this appliance or it’s power cord to fire and other sources of heat. •... - Page 4 Note This appliance features non-serviceable parts. If it needs to be repaired, contact • Kogan.com for support. Do not use the appliance without a nozzle attached. • Do not fill the appliance with the mouth wash as this may cause corrosion.
- Page 5 OVERVIEW Nozzle Nozzle release button Charging port Top cover LED indicators Power button Body Water tank Water tank lid...
-
Page 6: Operation
OPERATION Charging the flosser Plug the power cord into the charging port. Plug the power cord into a power outlet. The charging indicator on the main body will begin blinking. Note: The water flosser will take approximately 4 hours to fully charge. When the water flosser is fully charged the indicator light will be stop blinking and remain on. - Page 7 Filling the water flosser Open the water tank lid. Holding the main body horizontally fill the water tank with clean water (Figure 2). Close the water tank lid. Figure 2 Note: Do not fill the water tank with water exceeding 40°C. Using the water flosser Press the Power button to begin the flow of water.
- Page 8 Changing flossing modes The water flosser features four different flossing modes: Normal, Soft 1, Soft 2 and Pulse. Press the Power button during operation to cycle between the modes. Normal: For the normal cleaning of teeth. • Soft 1: For the users with sensitive teeth. •...
-
Page 9: Cleaning And Care
CLEANING & CARE The water flosser with can be cleaned with water or mild detergent. No not use any corrosive or abrasive detergent as it will damage the water flosser. Do not clean with water exceeding 50°C. Cleaning the body: Clean the body with a dry or damp cloth. -
Page 10: Troubleshooting
Replace the nozzle. The water pressure is low. The filter is blocked. Clean the filter. The battery is dead. Contact Kogan.com. The water flosser only operates for a short time after The water flosser has not Charge the water flosser for being charged. - Page 11 Unscrew the screws on the bracket of the unit core using a Phillips head screwdriver (Figure 6). Figure 6 Cut off the connecting wires of the battery and the charging cable with scissors, then remove the battery (Figure 7). Figure 7 Recycle or dispose the battery correctly.
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...