Advertisement
TROUBLESHOOTING
Problem
The water flosser will not turn
on.
The water pressure is low.
The water flosser only
operates for a short time after
being charged.
The charging indicator does
not illuminate when
charging.
Declaration for hazardous substances
Part name
Pb
PCB
X
NOTE: "X" means YES; "O" means NO.
Disposal of rechargeable battery
Do not dismantle the water flosser unless it is being discarded. Please unplug the appliance
before removing the battery.
1.
Ensure that the battery has been exhausted before removing it. To discharge the
battery, press the Power button to turn on the water flosser and continue to run it
until it stops working. Repeat several times until the battery is completely flat.
2.
Remove the water tank and detach the top cover
3.
Remove the unit core.
Possible cause
The battery is flat.
The nozzle is blocked.
The filter is blocked.
The battery is dead.
The water flosser has not
been fully charged.
The power cord is not
properly connected.
Circuit malfunction.
Declaration for Hazardous Substances
Hazardous Substances
Hg
Cd
O
O
Solution
Charge the water flosser for
at least 24 hours.
Replace the nozzle.
Clean the filter.
Contact Kogan.com.
Charge the water flosser for
at least 24 hours.
Check the power cord
connections.
Contact Kogan.com.
Cr (VI)
PBB
O
O
PBDE
O
Advertisement
