• WARNING: If the beverage cooler is damaged, stop use immediately and contact help.Kogan.com for assistance. • If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance. • If the LED lamps in the beverage cooler need replacing, contact help.Kogan.com for assistance.
Page 4
• WARNING: If a previous beverage cooler is being replaced, ensure to remove the doors, and leave the shelves in place to prevent children from entering the appliance. • The refrigerant and cyclopentane foaming material used in this beverage cooler is flammable.
Page 5
OVERVIEW 43L Beverage Cooler Door handle Glass shelf Thermostat knob Levelling foot 93L Beverage Cooler LED light Door handle Steel wire protective cover Thermostat knob Levelling foot Note: Images used in this user guide are for reference only.
BEFORE FIRST USE • Remove all packaging and tape from inside the beverage cooler. Remove the protective film on the door and beverage cooler body. • Wipe the interior of the beverage cooler to clean any dust and other particles. Reversing the door swing ASSEMBLY If you would like to change the direction of the swing for the door (right swing to left swing),...
Page 7
3. Loosen the door axle sleeve (6) located on the bottom right of the door, door stopper (7) and block screws (8) then secure the components (6, 7, 8) to the left side. 4. Loosen the adjustable foot (10), position bolts (4), and lower hinge (9), then install the components (4, 9, 10) in the reverse order on the left side of the beverage cooler body.
OPERATION 1. Place the beverage cooler on a stable flat surface in a well-ventilated area. Ensure there is at least a 30cm clearance above, and at least a 10cm clearance on the sides of the beverage cooler. Rotate the levelling feet if the beverage cooler is unstable. 30cm 10cm 10cm...
Page 9
3. Open the door and place the beverages into the cooler. The number of bottles that can fit into the cooler will vary depending on their size. Notes: • Do not allow bottles to touch the back of the beverage cooler as this can restrict the circulation of cool air.
CLEANING & CARE The beverage cooler should be cleaned regularly. Ensure the beverage cooler is set to the OFF temperature mode or is unplugged before cleaning. Interior The interior of the cellar should be cleaned regularly to avoid odour. • Remove any drinks and shelves inside the beverage cooler. •...
Illuminating light does not shine • Check if the light is damaged. If so, stop use and contact help.Kogan.com for assistance. • If there are too many beverages in the beverage cooler, this may lead the compressor to run for longer to reach the desired temperature.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...