SAFETY & WARNINGS • Do not attempt to disassemble or repair the product. If the product needs to be repaired, contact Kogan.com. • Do not damage the power cable in any way. Stop using the device if there is any damage to the power cord.
Page 4
OVERVIEW Mist outlet Light button Upper cover High / Wi-Fi button Water tank cover Mist button Air outlet Air intake Water tank DC socket Base Water outlet...
Page 5
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page.
Page 6
Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the white will be flashing rapidly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by long pressing the middle button (High/Low/Wi-Fi) for 5-8 seconds or until the white light begins rapidly flashing.
Page 7
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
Page 8
Functions available within the app Click to turn on the Spray Click to switch to Large spray Click to switch to Small spray mode (HIGH) mode (LOW) Set a timer Turn on the light Choose cycle mode...
Page 10
From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
Page 11
Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
Page 12
Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
Page 13
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &...
Page 14
Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
Page 15
SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™...
OPERATION Remove the upper cover (figure 1). Connect the AC adapter to the DC socket on the base (figure 2). Using the measuring cup, fill the water tank with tap water up to the maximum water level line. Do not overfill, mist output may be low. Do not use hot water.
Page 17
Connect the AC adapter to a power outlet. Operate the mist button on the right-hand side of the unit: 1st press: sets timer for one hour of continuous mist. 2nd press: sets timer for two hours of continuous mist. 3rd press: sets timer for three hours of continuous mist. 4th press: continuous mist;...
CLEANING & CARE After using 5-6 times or for 3-5 days, please clean the product as below: Unplug the unit from power supply and remove the cover. Pour any remaining water out from the drain side of the water tank. Add some warm water into the tank, mix with a neutral detergent and wash with a clean cloth.
TROUBLESHOOTING Issue Solution Confirm the tank contains water up to the level line. Confirm the power adapter is connected to the Device powers off one second wall outlet correctly. after turning on. Power cycle the device by unplugging the power adapter, leaving it for 10 seconds and then plugging it back in.
Page 20
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...