Advertisement
Changing flossing modes
The water flosser features four different flossing modes: Normal, Soft 1, Soft 2 and Pulse.
Press the Power button during operation to cycle between the modes.
Normal: For the normal cleaning of teeth.
•
Soft 1: For the users with sensitive teeth.
•
Soft 2: For the users with sensitive teeth. This setting is recommended for first time
•
users.
Pulse: This mode is used for massaging gums which to help promote blood
•
circulation and strengthen the teeth.
Note:
It is recommended to use the "Soft 2" mode for at least week.
Emptying the water tank
After usage, the water tank should always be completely emptied.
1.
Holding the water flosser horizontally, open the water tank lid and allow the water
to drain out (Figure 5).
2.
Press the Power button to ensure no residual water is left in the water tank.
3.
Close the water tank lid and wipe the flosser with a dry cloth.
Note:
When not in use the water flosser should be free of residual water to avoid
bacterial infection. If it is not used for an extended period of time, ensure to
clean the water flosser well, then dry and store it.
Figure 5
Advertisement
