Table of Contents
Advertisement
TROUBLESHOOTING
Problems
Jet tip is damaged
Water tank is leaking
Water is leaking from the jet
tip and its socket
No water flow or insufficient
pressure
SPECIFICATIONS
Power Input
Battery Voltage
Battery Capacity
Reason
Severe nozzle damage.
Water or other liquid is left in
the water tank.
The water tank cover is not
closed.
The seal is damaged.
The jet tip is not properly
installed.
Flosser is inverted.
Insufficient water in the
tank.
Wrong working mode.
AC 5V 1A
3.7 V
2000 mAh
Method of handling
Replace the jet tip.
Close the water tank cover.
Make sure to empty the
water tank after use.
Contact Kogan.com to
replace the seal.
Remove the jet tip and
reinstall.
The jet tip must be above
the water tank.
Fill the tank with sufficient
water. See the Operation
section of this user guide.
Select the appropriate
mode. See the Operation
section of this user guide.
Advertisement
Table of Contents
