Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KASNSRWFTHA
Summary of Contents for Kogan KASNSRWFTHA
- Page 1 KOGAN SMARTERHOME™ SMART TEMPERATURE & HUMIDITY SENSOR (WI-FI) KASNSRWFTHA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read all instructions and safety notes before first use. Retain this guide for future reference. • Do not use in an environment with humidity over 90%. • Do not use in an environment with temperature lower than -10°C. •... - Page 4 Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To Register Tap to enter registration page.
- Page 5 Set device in pairing mode Open the battery compartment and install two (2) AAA batteries and close. Alternatively, this product can be powered using a USB cable. When the device is first turned on, it may automatically enter pairing mode (device will beep).
- Page 6 Add device through network Once registered, tap “+” in the upper right corner of the app’s home page to add a new device through the network. Select the product type from the list of options in the app (Sensor > Thermostat). Ensure that the device is in pairing mode, with the Wi-Fi icon flashing rapidly and tap “Confirm indicator rapidly blink”.
- Page 7 Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
- Page 8 Connect your smart phone to your 2.4GHz Wi-Fi network. Ensure that Bluetooth is enabled on your smart phone. Open the “Kogan SmarterHome” app. Tap “+” in the upper right corner of the app’s home page to add a new device through the network.
- Page 9 If the above two methods aren’t successful, use ‘AP Mode’ to add device Remove and re-insert the batteries then use a pin to press the reset button for 5 seconds until the Wi-Fi icon begins flashing rapidly. Press the reset button for another 5 seconds until the Wi-Fi icon begins flashing slowly.
- Page 10 Select “AP Mode” for the set-up type. Ensure that the device is in pairing mode, with the Wi-Fi icon flashing slowly and tap “Confirm indicator slowly blink”. 10. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
- Page 11 Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
-
Page 12: Operation
OPERATION Setting up automation Tap the Temperature and Humidity sensor icon in the app’s device list. Tap “Smart”’ then click “+” at ‘Condition (Any Condition is Met)’... - Page 13 When prompted tap “When device status changes”. Select the desired function and set the condition. For example, set 'Temperature alarm' > choose 'High Temperature alarm'. Tap “+” in the ‘Task’ section or “Add Task” then select “Run the device”. Choose your desired smart device from the list.
- Page 14 Select the desired function of the device tap “Save” and then “Next”. Follow the prompts on the app and rename the automation by tapping ‘Name’. Tap “Style” and select a colour for the automation then tape “Save”. 10. When prompted ‘Automation created. Start using it?’, tap “Yes” to finish.
- Page 15 Turning automation on and off Tap the Temperature and Humidity sensor icon in the app’s device list. Tap “Smart”, the switch on the lower right corner of the automation window is ON by default. Use the button to toggle between the ON and OFF state. Editing and delete the automation Tap “Smart”...
- Page 16 Wi-Fi reset Press and hold the ‘RESET’ button for 5 seconds or until till the device emits a ‘Beep’. Alarm switch The alarm switch is used to turn the alarm tone ON or OFF. Firmware upgrade • When new firmware is available, the app will display ‘new device firmware found’, tap “Upgrade now”, the device will turn on the ‘Automatically keep the device up to date’...
-
Page 17: Specifications
SPECIFICATIONS USB input DC 5V/2A Dry battery input voltage x2 AAA Batteries Resting current ≤75uA Alarm current ≤60mA Low voltage and undervoltage ≤2.2V Wi-Fi 802.11b/g/n Temperature detection range -10°C ~+55°C Humidity detection range 0-99%RH Alarm volume 55dB Installation method Wall-mounted Operating temperature -10°C ~+55°C Operating humidity... - Page 18 NOTES...
- Page 20 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...