SmarterHome Full HD Slim Wireless Smart Video Doorbell with Chime KAFHDSLDBELA Quick Start Guide Table of Contents Overview Installation Install the Application Google Home Control Alexa Operation Troubleshooting In the Box...
Overview Component Description peaker udio output deo capture frared LED dditional light in low-light conditions ght Sensor ght sensor dicator light atus Indicator light shows the doorbell’s status oorbell button ou will receive notification from the mobile app when it's pressed icrophone etects sound for the mobile App...
Component Description E Label roduct label y pressing the reset button on the back of the device for more than 3 seconds, eset you will reset the device. You will hear a sound and see the indicator light blinking red, confirming the reset arm button amper alarm SB Port...
Page 4
Step 2: T ear off the protective film on the 3M sticker, apply it on a smooth wall surface at the appropriate height. Hang the device on the bracket from top down lining up the hole at back of device. Tighten the screw on the bottom of the unit to the bracket.
Install the Application Download the “Kogan Smarter Home” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan Smarter Home account, register or sign in with a verification code sent by SMS. To register 1.
Page 6
Smart configuration: 5. After successfully configuring the devices, the device will be shown on the home page. Tap to enter its control page. Note...
When device is offline, it displays “Offline” and cannot be remotely powered on. Google Home Control Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome device. 1. Select “Menu” and then “Home Control”.
Alexa Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome device. 1. Select “Menu” and then “Skills”. 2. Search for the app and enable it. 3. Log into your SmarterHome account with your email address or mobile number.
Operation 1. Open the waterproof cover on the back of the device. 2. Switch it from [OFF] to [ON] and then put the cover on.
Page 10
LED Indicator LED status Device status Fast blinking blue LED (5 times per second) Trying to connect to Wi-Fi Slow blinking red LED (2 times per 3 seconds) Ready or reset to successfully configure Slow blinking blue LED (1 time per 3 seconds) Connecting to service Blue and Red LED are off Sleep mode or off-line...
Page 11
• Take the device inside for charging. Using the supplied micro USB cable, connect the device to a 5V/2A USB power adaptor and allow the unit to charge for a minimum of 4 hours. (For convenience, you can use the USB adaptor of your mobile phone) ...
After configuration is complete, the device will show on the mobile App, and you will be able to use your smart device. If you should have any questions about using the app or the device, visit the Kogan Help Centre: https://help.kogan.com In the Box ...
Page 13
User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/...
Need help?
Do you have a question about the KAFHDSLDBELA and is the answer not in the manual?
Questions and answers