Charging The Battery - Cardinal Health NPWT PRO Patient User Manual

2.2 Charging the Battery

The Cardinal Health™ NPWT PRO family of devices has an internal battery that provides up to 24 hours of operation from
a single full-charge. When the battery is running low, an alarm will sound to let you know you must plug in the device
to charge the battery. See section 3.3 ALARM OPERATION of this manual for Alarm Troubleshooting.
1. Plug the device's A.C. Adapter into a suitable wall outlet (100-240 VAC, 50-60Hz)
2. Insert the power plug into the Battery Charging Port on the side of the device (Figure 2).
3. The device will continue to work when charging
The Cardinal Health™ NPWT PRO family of devices should only be used with the supplied A.C. Adapter. Use of an
incorrectly rated adapter could create a shock hazard for the patient and caregiver.
Figure 2
Battery Charging Port
7