EN
7.1.3. Replace the filter element and float drain
Exchange the filter element and the float drain once every year in accordance with the maintenance schedule.
Further information about exchanging spare parts is included on a leaflet with the spare parts.
Tools
• Mounting tool
1.
1.
Depressurise the device and secure against pressure being applied again:
Depressurise the device and secure against pressure being applied again:
2. 2.
De-energise the device and secure it against being switched back on again.
De-energise the device and secure it against being switched back on again.
Remove the mains plug.
Remove the mains plug.
A "click" noise indicates the opening of the solenoid valve.
A "click" noise indicates the opening of the solenoid valve.
Pressure drop is taking place in the device.
Pressure drop is taking place in the device.
12
7
11
7
13
DRYPOINT
M eco control
®
•
Filter element
•
Float drain
Preparatory tasks
Maintenance work
DRYPOINT
®
M
eco control
4
6
8
!
NEXT ELEMENT
CHANGE
9
20..
20..
20..
10
16
Prerequisites
Material
[4]
Eco label
[6]
Filter element
[7]
O-rings (housing)
[8]
Housing extension
[9]
Maintenance label: Filter replacement
[10]
Housing base
[11]
Housing body with membrane element
[12]
Membrane dryer head
[13]
Float drain
[16]
Mounting tool for float drain
Installation and operating manual
Protective equipment
35