Beko DCU 7230 Installation & Operating Instructions And Drying Guidance

Beko DCU 7230 Installation & Operating Instructions And Drying Guidance

Condenser sensor dryer
Hide thumbs Also See for DCU 7230:

Advertisement

Condenser
Sensor Dryer
DCU 7230

Advertisement

Table of Contents
loading

Summary of Contents for Beko DCU 7230

  • Page 1 Condenser Sensor Dryer DCU 7230...
  • Page 2 Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1 Your Dryer Auxiliary function ........16 Warning indicators ......16 Overview ..........4 Time delay .........16 Technical Specifications .......5 Starting the programme .....16 Progress of programme .....16 2 Important safety information 6 Changing the programme after it has General safety ........6 started ..........16 Intended use ........7 Child-proof lock .........17...
  • Page 4: Your Dryer

    Overview 1- Control panel 5- Rating plate 2- Kick plate opening tab 6- Fluff filter 3-Adjustable feet 7- Power cord 4-Kick plate 4 EN...
  • Page 5: Technical Specifications

    Technical Specifications Height (adjustable) 84.6 cm Width 59.5 cm Depth 53 cm Capacity (max.) 7 kg Weight (net) 36 kg Voltage Rated power input See type label Model code Type label is located behind the loading door. Specifications of this appliance may change without notice to improve the quality of the product.
  • Page 6: General Safety

    Important safety instructions This section includes safety information that supplied with the product. If it is not will help protection from risks of personal compatible with the socket, have a injuries or materialistic damages. Failure qualified electrician change the socket to follow these instructions shall cause with a suitable one.
  • Page 7: Intended Use

    published service manual. when the On/Off button is on (while the • Inside and exhaust duct of the product dryer is energized), keep the door of the must be cleaned by the qualified service dryer closed. personnel periodically. Intended use •...
  • Page 8: Installation

    Installation Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products will cause risks for your safety. Appropriate installation location • Install the product in an environment which has no risk of freezing and is in a stable and level position.
  • Page 9: Adjusting The Feet

    with the machine instead of periodically draining the water collected in the water tank. Please refer to the detailed instructions supplied with the accessories pack. Connecting the water drain hose; Never unscrew the adjustable feet from their housings. First use •...
  • Page 10: Electrical Connection

    Electrical Connection Undercounter installation without the Make sure that you have an earthed top cover must only be carried out by an power outlet socket rated at 13 amps authorised agent.Risk of electric shock. (minimum). Important Attention! Fitting a different plug If you use your dryer as built-in, As the colours of the wires in the mains the socket must be reachable after...
  • Page 11: Initial Preparations For Drying

    Initial preparations for drying Things to be done for energy A B C saving: • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them.
  • Page 12: Preparing Laundry For Drying

    • Do not dry your unwashed laundry in the Adding laundry to the machine more dryer. than the level shown in the figure is not • Items soiled with cooking oils, acetone, recommended. Drying performance alcohol, fuel oil, kerosene, stain remover, will degrade when the machine is turpentine, paraffin and paraffin removers overloaded.
  • Page 13: Selecting A Programme And Operating Your Machine

    Selecting a Programme and Operating Your Machine Control panel 1. Filter cleaning warning light 5. Programme selection knob Warning light turns on when the filter is Used to select a programme. 6. Start/Pause/Cancel button full. 2. Programme follow-up indicator Used to start, pause or cancel the Used to follow-up the progress of the programme.
  • Page 14: Preparing The Machine

    Preparing the machine laundry from creasing will be activated if you do not take the laundry out after the 1. Plug in your machine. programme is over. This programme rotates 2. Place the laundry in the machine. the laundry in 10-minute intervals to prevent 3.
  • Page 15: Programme Selection And Consumption Table

    Programme selection and consumption table Approximate Spin speed amount of Drying time Programmes Capacity (kg) in washing remaining (minutes) machine (rpm) humidity Cottons / Coloreds Cupboard dry 1000 60 % Normal dry 1000 60 % Iron dry 1000 60 % Xpress 35 min.
  • Page 16: Auxiliary Function

    Auxiliary function During the time delay period, laundry Cancel audio warning is rotated for 4 seconds in every 10 Your dryer will give an audio warning when minutes to prevent creasing. the programme comes to an end. If you do Cancelling the time delay not want to hear the audio warning, press If you want to cancel the time delay...
  • Page 17: Child-Proof Lock

    3. Press “Start/Pause/Cancel” button to audio warning” buttons simultaneously for 3 start the programme. seconds to activate the child-press lock. To start a new programme after the programme Press “Start/Pause/Cancel” button for is over or to interrupt the programme, the child- 3 seconds to cancel the programme proof lock should be deactivated.
  • Page 18: End Of Programme

    End of programme The “End/Anti-creasing”, “Filter cleaning” and “Water tank” warning lights on the programme follow up indicator will turn on when the programme comes to an end. The door can be opened and the machine becomes ready for a second cycle. Press “On/Off”...
  • Page 19: Maintenance And Cleaning

    Maintenance and cleaning Filter Cartridge / Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Filter Cartridge”. Such fibre and lint are generally formed Sensor during wearing and washing. Always clean the filter and the inner surfaces of the cover after each drying process.
  • Page 20: For The Condenser

    programme is running! 2. Unlock the 2 condenser locks after If you forget to drain the water tank, your opening the kick plate. dryer will stop during the following drying cycles when the water tank is full and the “Water tank” warning light will turn on. If this is the case, press the “Start/Pause/ Cancel”...
  • Page 21 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 6. Close the kick plate cover. 21 EN...
  • Page 22: Suggested Solutions For Problems

    Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. •...
  • Page 23: Guarantee

    Guarantee Important notes Your new product is guaranteed against the cost of breakdown repairs for twelve months • Your product is designed and built for from the date of the original purchase. domestic household use only. What is covered? • The guarantee will be void if the product is installed or used in commercial or non- •...
  • Page 24: Service

    Service Service once the manufacturers Please keep your purchase receipt or other proof of purchase in a safe place; you will guarantee has expired. need to have it should the product require If you have purchased an extended attention under guarantee. guarantee please refer to the instructions You should also complete the details below;...

This manual is also suitable for:

Dsc64wDsc64s

Table of Contents