Advertisement
7–8
3.
Once the correct password is entered, push ENTER.
The
message will reappear, the PRG faceplate LED will flash, and the first
Ct-n
digit of the "B" screen will also flash.
4.
Use the DOWN button to change the first digit.
5.
Use the RIGHT button to select and change the successive digits.
6.
When the new value is entered, push ENTER twice.
This will display the
7.
Use the RIGHT button to scroll to change the value from
8.
When the
Stor ALL? YES
setting.
The
message will appear and the meter will reset.
Stor ALL donE
CHAPTER 7: CONFIGURING THE METER USING THE FRONT PANEL
screen.
Stor ALL? no
message is displayed, press ENTER to change the
EPM 2200 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
to
.
no
YES
Advertisement
