Note
EPM 2200 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
Current, CT, PT and Energy Settings will cause invalid energy accumulator values.
Change the inputted settings until the message disappears.
SETTINGS
Password (Meter is shipped with Password Disabled; there is NO DEFAULT PASSWORD)
Enable Password for Reset
Enable Password for Configuration
Change Password
Change VSwitch
(Call GE Multilin for Update Information.)
Change Device Designation
Enter a new Device label in the entry field.
1.
Click Update to send a new Profile.
After programming the Device Profile, click:
• Update to send the new Profile to the connected meter.
If the Update fails, the software asks if you want to try again to Update.
• Save to save the Device Profile settings in a file.
• Cancel (once you have loaded or saved the Device Profile) to Exit the EPM2200
Profile screen.
CHAPTER 5: COMMUNICATION INSTALLATION
5–11