Specifications - Makita UB001C Instruction Manual

SPECIFICATIONS

Model:
Capacities
Overall length (with end nozzle)
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Applicable portable power pack
PDC1200 / PDC01
WARNING:
Only use the portable power
packs listed above. Use of any other portable power
packs may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Keep hands away from rotating parts.
Long hair may cause entanglement
accident.
Keep bystanders away.
Wear eye and ear protection.
Do not expose to moisture.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their imple-
mentation in accordance with national laws,
electric equipment and batteries and battery
pack(s) that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Intended use
The machine is intended for blowing dust.
Air volume
Air speed (average)
Air speed (max.)
960 mm / 1,010 mm / 1,060 mm
D.C. 36 V - 40 V max
Noise
The typical A-weighted noise level determined accord-
ing to EN50636-2-100:
Sound pressure level (L
Uncertainty (K) : 2.2 dB(A)
Sound power level (L
Uncertainty (K) : 2.5 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN50636-2-100:
Work mode: operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
2 ENGLISH
UB001C
3
0 - 17.6 m /min
0 - 58.0 m/s
0 - 70.0 m/s
2.6 - 2.9 kg
IPX4
) : 83.4 dB(A)
pA
) : 91.4 dB (A)
WA
2
) : 2.5 m/s or less
h
2