Blower Operation - Makita UB001C Instruction Manual

Blower operation

CAUTION:
Do not place the machine on the
ground while it is switched on. Sand or dust may
enter from suction inlet and cause a malfunction or
personal injury.
Hold the machine firmly with a hand and perform the
blowing operation by moving it around slowly. When
blowing around building, big stone or vehicle, direct the
nozzle away from them. When performing an operation
in a corner, start from the corner and then move to wide
area.
When setting down the machine, unlock the buckle
on the hanging band with one hand while holding the
machine with the other hand.
1
► 1. Buckle
1
► 1. Buckle
When setting down the machine and the portable power
pack at the same time, unlock the buckle on the waist
belt, and then set down the machine and the portable
power pack.
► 1. Buckle
13 ENGLISH
1